Buying the wrong size air conditioner is one of the most common and most expensive mistakes we see. Too small and it runs flat-out and still can't keep up on a 40-degree day. Too big and you've paid extra for a unit that cycles on and off and doesn't dehumidify properly. Here's how sizing works for Sydney homes.
Air conditioner sizes are measured in kilowatts (kW)
The kW rating is the system's cooling capacity, how much heat it can remove from a room. It's not how much power it uses. A 7 kW unit can move about 7 kW of heat, while drawing only a fraction of that in electricity thanks to inverter technology.
Rough sizing guide by room
| Room size | Example | Typical capacity |
|---|---|---|
| Up to ~20 m² | Bedroom, study | 2.5–3.5 kW |
| ~20–35 m² | Large bedroom, small living room | 3.5–5 kW |
| ~35–50 m² | Living room, kitchen/dining | 5–7 kW |
| ~50–70 m² | Large open-plan living | 7–9 kW |
| Whole home (ducted) | 3–5 bedroom house | Commonly 10–20 kW, calculated per home |
A starting point only. Assumes standard 2.4–2.7 m ceilings and reasonable insulation. The factors below can push you up or down a size.
Sydney factors that change the answer
Which way the room faces
A west-facing living room cops the full afternoon sun, and in Sydney summers that can mean a lot of extra heat. North-facing rooms get steady sun all day. These often need the next size up compared with a shaded, south-facing room.
Where you are in Sydney
Western Sydney, from Parramatta out to Penrith, regularly runs several degrees hotter than the coast on summer afternoons. A room in Penrith may need more capacity than the same room in Cronulla or Maroubra.
Insulation and windows
Uninsulated ceilings, big single-glazed windows, sliding doors and skylights all let heat pour in. Older Sydney homes, like double-brick or fibro with little roof insulation, usually need more capacity than a modern, well-insulated build.
Ceiling height and open plan
High or raked ceilings mean more air to cool. Open-plan spaces that flow into hallways or stairwells need to be sized as one bigger space.
People and appliances
A kitchen with an oven running or a home office with computers adds heat. So does a lounge full of people at Christmas.
Why bigger isn't always better
An oversized unit cools the air quickly then switches off before it has removed the humidity, leaving the room cold but clammy. That's especially noticeable in humid Sydney summers. It also costs more to buy. The goal is the right size, not the biggest.
Sizing ducted systems
Ducted sizing is more involved. It considers every room, the duct runs, the number of zones, and how many zones you'll run at once. That's why ducted quotes should always be based on an assessment of your home, not a quick guess over the phone.

The easy way
Use the table above to get a feel for it, then let us confirm. Getting the size right is the difference between an aircon you love and one you fight with every summer. Next, check our cost guide to see what each size typically costs.
Quick questions
What size air conditioner do I need for a bedroom?
Most bedrooms up to around 20 m² need a 2.5–3.5 kW split system, more if the room is west-facing, poorly insulated or has large windows.
What size air conditioner do I need for a living room?
A typical living room of 35–50 m² usually needs around 5–7 kW. Large open-plan areas may need 7–9 kW or more.
Is it bad to oversize an air conditioner?
Yes. An oversized unit costs more to buy, cycles on and off, and doesn't remove humidity well, leaving rooms cold but clammy.



