"How much will it cost?" is the first question almost every Sydney homeowner asks us, and the honest answer is: it depends. That's not a dodge. Two homes on the same street can need very different systems. This guide gives you realistic 2026 price ranges, explains what pushes a quote up or down, and shows you how to compare quotes properly.
Quick answer: typical Sydney price ranges
Independent cost guides published in 2026 put most supplied-and-installed split systems in Sydney at roughly $1,400 to $5,200, and whole-home ducted systems at roughly $9,000 to $16,000, with larger homes and premium setups going higher. Those figures include the unit, standard installation and GST.
| System | Typical use | Indicative supply + install |
|---|---|---|
| Small split (2.5–3.5 kW) | Bedroom, study, small room | Lower end of the split range |
| Medium split (5–7 kW) | Living room, open kitchen/lounge | Middle of the split range |
| Large split (8–9 kW) | Big open-plan living | Upper end of the split range |
| Multi-head split | 2–4 rooms off one outdoor unit | Between split and ducted |
| Ducted (3–4 bed home) | Whole-home heating & cooling | Around $9,000–$16,000+ |
These are industry ranges to help you budget, not Ice Age Air prices. Your quote is based on your home.
What actually drives the price
1. System type and capacity (kW)
The biggest factor. A 2.5 kW bedroom split and a 14 kW ducted system are different machines. Bigger capacity means a bigger unit, more refrigerant pipe and usually more labour. Getting the size right matters more than squeezing the price. An undersized system works flat-out all summer and costs more to run (see our sizing guide).
2. Brand and efficiency
Premium brands like Daikin and Mitsubishi Electric cost more up front but tend to be quieter, more efficient and better supported. A higher energy star rating usually means lower running costs, which adds up quickly in a Western Sydney summer.
3. How difficult the install is
- Back-to-back vs long pipe runs: an indoor unit on the other side of the wall from the outdoor unit is the simplest, cheapest install.
- Double-storey homes and apartments: second-floor units, balcony placement or rooftop condensers can need extra equipment and time.
- Roof space (ducted): tight, low or hot roof spaces take longer to work in.
- Electrical: some homes need a new dedicated circuit or a switchboard upgrade.
4. Replacing an old system
Swapping out an old unit can save money if the existing pipework, ductwork or wiring can be reused safely. One of our customers had a split-to-ducted upgrade that reused existing infrastructure. Old units also need refrigerant recovered properly before removal.
5. Strata and access
Apartment installs in Sydney often need strata approval and coordination with building managers. We're used to working around strata timetables.

Running costs: the price after the install
The cheapest unit to buy isn't always the cheapest to own. An efficient, correctly sized inverter system that's serviced yearly will usually cost noticeably less to run than an old or oversized unit. Ducted systems with zoning let you cool only the rooms you're using, which is the single best way to keep ducted running costs down.
Are there rebates in NSW?
The NSW Government's Energy Savings Scheme offers an upfront discount on eligible energy-efficient air conditioners, particularly when you're replacing an older, less efficient system. The discount is applied at the time of installation rather than claimed back later, and eligibility depends on the product and your situation. Ask us when you request a quote and we'll check whether your install may qualify.
How to compare quotes properly
- Check it's the same capacity. A cheaper quote for a smaller unit isn't a saving if it can't cool the room.
- Get the brand and model number. "Reverse-cycle 7 kW" isn't enough to compare.
- Ask what's included: pipe length, electrical work, removal of the old unit, brackets, and clean-up.
- Ask about workmanship warranty. The manufacturer's warranty covers the unit. Workmanship covers the install. We offer 7 years on workmanship.
- Check licences. Anyone handling refrigerant needs an ARC refrigerant handling licence.
- Insist on a fixed price. "Quote matched the final price" is the review we're proudest of.
The bottom line
For most Sydney homes, budget a few thousand dollars for a quality split system, or around the ten-thousand mark and up for ducted. Then get a fixed quote from someone who has actually looked at your home. That's exactly what we do, for free.
Quick questions
How much does a split system cost to install in Sydney?
Independent 2026 cost guides put a supplied-and-installed split system in Sydney at roughly $1,400 to $5,200, depending on size, brand and how difficult the install is.
How much does ducted air conditioning cost in Sydney?
Whole-home ducted systems in Sydney typically cost around $9,000 to $16,000 installed, with larger homes, extra zones and difficult roof access costing more.
Is it cheaper to replace an old air conditioner?
Sometimes. If existing pipework, ductwork or wiring can be safely reused, a replacement can cost less than a brand-new install, and NSW Energy Savings Scheme discounts may apply when upgrading to an efficient model.


